Formstücke werden vorwiegend in Vakuumförderanlagen eingesetzt. Sie dienen zur Verteilung des Schüttguts oder der benötigten Förderluft.
Zur Förderung und Verteilung von abrasiven Schüttgütern empfehlen wir die Verwendung von Formstücken aus gehärtetem Edelstahl oder Glas. Eine aufwendige Suche nach Leckagen und ein Produktionsstillstand könnten dadurch vermieden werden.
In zentralen Materialfördersystemen erzeugen Vakuumgebläse die erforderliche Förderluft. Siebe in Förderabscheidern scheiden das Granulat von der Förderluft ab. Ebenso werden Staubanteile vor dem Vakuumgebläse abgeschieden, um es zu schützen. Diese Staubanteile können abrasiv sein und verursachen Verschleiß − auch in Vakuumleitungen. Deshalb fertigen wir keine Formstücke aus Aluminium, sondern mindestens aus Edelstahl.
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.30.038.15.038.15.CR | 38 | 38 | 1.5 | 300 | 200 |
FS.30.040.15.040.15.CR | 40 | 40 | 1.5 | 300 | 200 |
FS.30.045.15.045.15.CR | 44.5 | 44.5 | 1.5 | 300 | 200 |
FS.30.050.15.050.15.CR | 50 | 50 | 1.5 | 300 | 200 |
FS.30.060.15.045.15.CR | 60.3 | 44.5 | 1.5 | 300 | 200 |
FS.30.060.15.050.15.CR | 60.3 | 50 | 1.5 | 300 | 200 |
FS.30.060.15.060.15.CR | 60.3 | 60.3 | 1.5 | 300 | 200 |
FS.30.065.15.065.15.CR | 65 | 65 | 1.5 | 400 | 300 |
FS.30.070.20.050.20.CR | 70 | 50 | 2.0 | 300 | 190 |
FS.30.070.20.070.20.CR | 70 | 70 | 2.0 | 400 | 300 |
FS.30.076.20.076.20.CR | 76.1 | 76.1 | 2.0 | 400 | 300 |
FS.30.080.20.080.20.CR | 80 | 80 | 2.0 | 400 | 300 |
FS.30.084.20.084.20.CR | 84 | 84 | 2.0 | 400 | 300 |
FS.30.089.20.089.20.CR | 88.9 | 88.9 | 2.0 | 450 | 350 |
FS.30.100.15.100.15.CR | 100 | 100 | 1.5 | 450 | 350 |
FS.30.102.20.102.20.CR | 101.6 | 101.6 | 2.0 | 450 | 350 |
FS.30.104.20.104.20.CR | 104 | 104 | 2.0 | 450 | 350 |
FS.30.108.20.108.20.CR | 108 | 108 | 2.0 | 450 | 350 |
FS.30.114.20.114.20.CR | 114.3 | 114.3 | 2.0 | 450 | 350 |
FS.30.129.20.129.20.CR | 129 | 129 | 2.0 | 450 | 350 |
FS.30.154.20.154.20.CR | 154 | 154 | 2.0 | 640 | 490 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.45.038.15.038.15.CR | 38 | 38 | 1.5 | 250 | 160 |
FS.45.040.15.040.15.CR | 40 | 40 | 1.5 | 250 | 160 |
FS.45.045.15.045.15.CR | 44.5 | 44.5 | 1.5 | 250 | 160 |
FS.45.050.15.050.15.CR | 50 | 50 | 1.5 | 250 | 160 |
FS.45.054.20.054.20.CR | 54 | 54 | 2.0 | 250 | 160 |
FS.45.060.15.045.15.CR | 60.3 | 44.5 | 1.5 | 250 | 160 |
FS.45.060.15.050.15.CR | 60.3 | 50 | 1.5 | 250 | 160 |
FS.45.060.15.060.15.CR | 60.3 | 60.3 | 1.5 | 250 | 160 |
FS.45.063.15.063.15.CR | 63.5 | 63.5 | 1.5 | 250 | 160 |
FS.45.065.15.065.15.CR | 65 | 65 | 1.5 | 250 | 160 |
FS.45.070.20.050.15.CR | 70 | 50 | 2.0/1.5 | 300 | 200 |
FS.45.070.20.070.20.CR | 70 | 70 | 2.0 | 300 | 200 |
FS.45.076.20.050.15.CR | 76.1 | 50 | 2.0/1.5 | 300 | 200 |
FS.45.076.20.060.15.CR | 76.1 | 60.3 | 2.0/1.5 | 300 | 200 |
FS.45.076.20.076.20.CR | 76.1 | 76.1 | 2.0 | 300 | 200 |
FS.45.080.20.080.20.CR | 80 | 80 | 2.0 | 300 | 200 |
FS.45.084.20.084.20.CR | 84 | 84 | 2.0 | 300 | 200 |
FS.45.089.20.089.20.CR | 88.9 | 88.9 | 2.0 | 370 | 250 |
FS.45.100.15.100.15.CR | 100 | 100 | 1.5 | 370 | 250 |
FS.45.102.20.063.15.CR | 101.6 | 63.5 | 2.0/1.5 | 370 | 250 |
FS.45.102.20.102.20.CR | 101.6 | 101.6 | 2.0 | 370 | 250 |
FS.45.104.20.104.20.CR | 104 | 104 | 2.0 | 370 | 250 |
FS.45.108.20.108.20.CR | 108 | 108 | 2.0 | 370 | 250 |
FS.45.114.20.114.20.CR | 114.3 | 114.3 | 2.0 | 370 | 250 |
FS.45.129.20.129.20.CR | 129 | 129 | 2.0 | 450 | 350 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.60.038.15.038.15.CR | 38 | 38 | 1.5 | 250 | 160 |
FS.60.050.15.050.15.CR | 50 | 50 | 1.5 | 250 | 160 |
FS.60.060.15.060.15.CR | 60 | 60 | 1.5 | 250 | 160 |
FS.60.065.15.065.15.CR | 65 | 65 | 1.5 | 250 | 160 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.Y.038.15.038.15.CR | 38 | 38 | 1.5 | 120 | 100 |
FS.Y.040.15.040.15.CR | 40 | 40 | 1.5 | 120 | 100 |
FS.Y.045.15.045.15.CR | 44.5 | 44.5 | 1.5 | 120 | 100 |
FS.Y.050.15.050.15.CR | 50 | 50 | 1.5 | 120 | 100 |
FS.Y.060.15.060.15.CR | 60.3 | 60.3 | 1.5 | 140 | 100 |
FS.Y.070.20.070.20.CR | 70 | 70 | 2.0 | 160 | 100 |
FS.Y.076.20.076.20.CR | 76.1 | 76.1 | 2.0 | 160 | 100 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.T.038.15.038.15.CR | 38 | 38 | 1.5 | 200 | 100 |
FS.T.040.15.040.15.CR | 40 | 40 | 1.5 | 200 | 100 |
FS.T.045.15.045.15.CR | 44.5 | 44.5 | 1.5 | 200 | 100 |
FS.T.050.15.038.15.CR | 50 | 38 | 1.5 | 200 | 100 |
FS.T.050.15.040.15.CR | 50 | 40 | 1.5 | 200 | 100 |
FS.T.050.15.050.15.CR | 50 | 50 | 1.5 | 200 | 100 |
FS.T.060.15.045.15.CR | 60.3 | 44.5 | 1.5 | 200 | 100 |
FS.T.060.15.050.15.CR | 60.3 | 50 | 1.5 | 200 | 100 |
FS.T.060.15.060.15.CR | 60.3 | 60.3 | 1.5 | 200 | 100 |
FS.T.065.15.050.15.CR | 65 | 50 | 1.5 | 200 | 100 |
FS.T.065.15.065.15.CR | 65 | 65 | 1.5 | 200 | 100 |
FS.T.070.20.070.20.CR | 70 | 70 | 2.0 | 300 | 150 |
FS.T.076.20.050.15.CR | 76.1 | 50 | 2.0 | 300 | 150 |
FS.T.076.20.060.15.CR | 76.1 | 60 | 2.0 | 300 | 150 |
FS.T.076.20.076.20.CR | 76.1 | 76.1 | 2.0 | 300 | 150 |
FS.T.080.20.080.20.CR | 80 | 80 | 2.0 | 300 | 150 |
FS.T.084.20.084.20.CR | 84 | 84 | 2.0 | 300 | 150 |
FS.T.089.20.089.20.CR | 88.9 | 88.9 | 2.0 | 300 | 150 |
FS.T.100.15.100.15.CR | 100 | 100 | 1.5 | 300 | 150 |
FS.T.102.20.102.20.CR | 101.6 | 101.6 | 2.0 | 300 | 150 |
FS.T.104.20.104.20.CR | 104 | 104 | 2.0 | 300 | 150 |
FS.T.114.20.114.20.CR | 114.3 | 114.3 | 2.0 | 300 | 150 |
FS.T.129.20.129.20.CR | 129 | 129 | 2.0 | 300 | 150 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.TC.040.15.040.15.CR | 40 | 40 | 1.5 | 145 | 100 |
FS.TC.050.15.050.15.CR | 50 | 50 | 1.5 | 145 | 100 |
FS.TC.060.15.060.15.CR | 60.3 | 60.3 | 1.5 | 145 | 100 |
FS.TC.076.20.076.20.CR | 76.1 | 76.1 | 2.0 | 220 | 150 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.30.040.15.040.15.CR.H | 40 | 40 | 1.5 | 300 | 200 |
FS.30.045.15.045.15.CR.H | 44.5 | 44.5 | 1.5 | 300 | 200 |
FS.30.050.15.050.15.CR.H | 50 | 50 | 1.5 | 300 | 200 |
FS.30.060.15.060.15.CR.H | 60.3 | 60.3 | 1.5 | 300 | 200 |
FS.30.089.20.089.20.CR.H | 88.9 | 88.9 | 2.0 | 450 | 350 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.45.038.15.038.15.CR.H | 38 | 38 | 1.5 | 250 | 160 |
FS.45.040.15.040.15.CR.H | 40 | 40 | 1.5 | 250 | 160 |
FS.45.045.15.045.15.CR.H | 44.5 | 44.5 | 1.5 | 250 | 160 |
FS.45.050.15.050.15.CR.H | 50 | 50 | 1.5 | 250 | 160 |
FS.45.060.15.045.15.CR.H | 60.3 | 44.5 | 1.5 | 250 | 160 |
FS.45.060.15.060.15.CR.H | 60.3 | 60.3 | 1.5 | 250 | 160 |
FS.45.114.20.114.20.CR.H | 114.3 | 114.3 | 2.0 | 370 | 250 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.T.050.15.050.15.CR.H | 50 | 50 | 1.5 | 200 | 100 |
FS.T.060.15.060.15.CR.H | 60.3 | 60.3 | 1.5 | 200 | 100 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.Y.040.15.040.15.CR.H | 40 | 40 | 1.5 | 100 | 120 |
FS.Y.050.15.050.15.CR.H | 50 | 50 | 1.5 | 100 | 120 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.45.047.50.047.50.GL | 47 | 47 | 5.0 | 250 | 160 |
FS.45.056.50.056.50.GL | 56 | 56 | 5.0 | 250 | 160 |
FS.45.066.50.066.50.GL | 66 | 66 | 5.0 | 250 | 160 |
Ø1 | Ø2 | t | L1 | L2 | |
---|---|---|---|---|---|
FS.TC.047.50.047.50.GL | 47 | 47 | 5.0 | 210 | 155 |
FS.TC.056.50.056.50.GL | 56 | 56 | 5.0 | 210 | 155 |
FS.TC.066.50.066.50.GL | 66 | 66 | 5.0 | 210 | 155 |
Ø | Material | |
---|---|---|
FR.SCHEIBE.040.AL | 40 | Aluminium |
FR.SCHEIBE.050.AL | 50 | Aluminium |
FR.SCHEIBE.060.AL | 60.3 | Aluminium |
Ø | Material | |
---|---|---|
VL.KAPPE.040.CR | 40 | Edelstahl |
VL.KAPPE.050.CR | 50 | Edelstahl |
VL.KAPPE.060.CR | 60.3 | Edelstahl |
VL.KAPPE.070.CR | 70 | Edelstahl |
VL.KAPPE.076.CR | 76.1 | Edelstahl |
VL.KAPPE.100.AL | 100 | Aluminium |
VL.KAPPE.150.AL | 150 | Aluminium |
VL.KAPPE.200.AL | 200 | Aluminium |