REDUCERS

The transition between different pipe cross-sections requires reducers. Our reducers fully meet the procedural requirements for a low gradient at the point of transition. Besides the smoothed weld seam on the longitudinal side of the pipe, no additional weld seams are necessary at the transition points due to the manufacturing process. Top quality is guaranteed!

THREADED PIPES

Threaded pipes are used to connect fittings (ball valves, socket slide valves ...) or on blowers. We manufacture the right transitions for the common metric or inch pipe diameters.

On request, we offer all reducers and threaded pipes in a hardened stainless steel variant.

Reducers

Reducers, hardened

Threaded pipes

Reducers (stainless steel)

Make a request!

	Ø1	Ø2	L
FS.RED.038.040.CR	38	40	150
FS.RED.038.045.CR	38	44.5	150
FS.RED.038.050.CR	38	50	150
FS.RED.038.054.CR	38	54	150

	Ø1	Ø2	L
FS.RED.040.045.CR	40	44.5	150
FS.RED.040.050.CR	40	50	150
FS.RED.040.054.CR	40	54	150
FS.RED.040.060.CR	40	60.3	150
FS.RED.040.063.CR	40	63.5	150

	Ø1	Ø2	L
FS.RED.045.050.CR	44.5	50	150
FS.RED.045.054.CR	44.5	54	150
FS.RED.045.060.CR	44.5	60.3	150

	Ø1	Ø2	L
FS.RED.050.054.CR	50	54	150
FS.RED.050.060.CR	50	60.3	150
FS.RED.050.063.CR	50	63.5	150
FS.RED.050.065.CR	50	65	150
FS.RED.050.070.CR	50	70	150

	Ø1	Ø2	L
FS.RED.054.060.CR	54	60	150
FS.RED.054.070.CR	54	70	150

	Ø1	Ø2	L
FS.RED.060.063.CR	60.3	63.5	150
FS.RED.060.065.CR	60.3	65	150
FS.RED.060.070.CR	60.3	70	200
FS.RED.060.076.CR	60.3	76.1	200
FS.RED.060.080.CR	60.3	80	200

	Ø1	Ø2	L
FS.RED.063.076.CR	63.5	76.1	200

	Ø1	Ø2	L
FS.RED.065.070.CR	65	70	200
FS.RED.065.076.CR	65	76.1	200
FS.RED.065.080.CR	65	80	200
FS.RED.065.084.CR	65	84	200

	Ø1	Ø2	L
FS.RED.070.076.CR	70	76.1	200
FS.RED.070.080.CR	70	80	200
FS.RED.070.084.CR	70	84	200
FS.RED.070.089.CR	70	88.9	200

	Ø1	Ø2	L
FS.RED.076.080.CR	76.1	80	200
FS.RED.076.084.CR	76.1	84	200
FS.RED.076.089.CR	76.1	88.9	200

	Ø1	Ø2	L
FS.RED.080.084.CR	80	84	200
FS.RED.080.089.CR	80	88.9	200
FS.RED.080.100.CR	80	100	200

	Ø1	Ø2	L
FS.RED.084.089.CR	84	88.9	200
FS.RED.084.102.CR	84	101.6	200
FS.RED.084.104.CR	84	104	200

	Ø1	Ø2	L
FS.RED.089.100.CR	88.9	100	200
FS.RED.089.102.CR	88.9	101.6	200
FS.RED.089.104.CR	88.9	104	200
FS.RED.089.108.CR	88.9	108	200
FS.RED.089.114.CR	88.9	114	230

	Ø1	Ø2	L
FS.RED.102.104.CR	101.6	104	200
FS.RED.102.108.CR	101.6	108	200
FS.RED.102.110.CR	101.6	110	200
FS.RED.102.114.CR	101.6	114.3	200

	Ø1	Ø2	L
FS.RED.104.108.CR	104	108	200
FS.RED.104.114.CR	104	114.3	200

	Ø1	Ø2	L
FS.RED.108.114.CR	108	114.3	200

Reducers (hardened stainless steel)

Make a request!

	Ø1	Ø2	L
FS.RED.038.040.CR.H	38	40	150
FS.RED.038.045.CR.H	38	44.5	150
FS.RED.038.050.CR.H	38	50	150
FS.RED.038.054.CR.H	38	54	150

	Ø1	Ø2	L
FS.RED.040.045.CR.H	40	44.5	150
FS.RED.040.050.CR.H	40	50	150
FS.RED.040.060.CR.H	40	60.3	150

	Ø1	Ø2	L
FS.RED.045.050.CR.H	44.5	50	150
FS.RED.045.060.CR.H	44.5	60.3	150

	Ø1	Ø2	L
FS.RED.050.054.CR.H	50	54	150
FS.RED.050.060.CR.H	50	60.3	150
FS.RED.050.063.CR.H	50	63.5	150
FS.RED.050.065.CR.H	50	65	150

	Ø1	Ø2	L
FS.RED.060.065.CR.H	60.3	65	150
FS.RED.060.076.CR.H	60.3	76.1	200

Threaded pipes

Made of stainless steel
Pipe inside offset-free

Make a request!

	Ø	R	L
FS.AST.038.15.140.15.CR	38	1.5"	140
FS.AST.040.15.140.15.CR	40	1.5"	140
FS.AST.045.15.140.15.CR	44.5	1.5"	140
FS.AST.050.15.140.15.CR	50	1.5"	140
FS.AST.060.15.140.15.CR	60.3	1.5"	140

	Ø	R	L
FS.AST.045.15.140.20.CR	44.5	2"	140
FS.AST.050.15.140.20.CR	50	2"	140
FS.AST.054.20.140.20.CR	54	2"	140
FS.AST.060.15.140.20.CR	60.3	2"	140
FS.AST.063.15.140.20.CR	63.5	2"	140

	Ø	R	L
FS.AST.060.15.160.25.CR	60.3	2.5"	160
FS.AST.063.15.160.25.CR	63.5	2.5"	160
FS.AST.065.15.160.25.CR	65	2.5"	160
FS.AST.070.20.160.25.CR	70	2.5"	160
FS.AST.076.20.160.25.CR	76.1	2.5"	160

	Ø	R	L
FS.AST.076.20.200.30.CR	76.1	3"	200
FS.AST.080.20.200.30.CR	80	3"	200
FS.AST.089.20.200.30.CR	88.9	3"	200