SLIDE VALVE AS.11

Our AS.11 slide valve is used in suction conveyor systems for plastic granules (Ø 3−8 mm) to shut off material and vacuum lines. This also applies to abrasive plastic granules with glass fibre content. It closes and opens pipelines reliably and over the full cross-section even during conveyance. Several slide valves can be controlled with a single magnetic valve.

“Open/close” function

Slide valve

Position detection

Slide valve AS.11
  • Stainless steel pipe connection
  • Valve housing made of aluminium
  • Slide plate made of PET
  • Bulk material temperature -15/+80 °C
  • Ambient temperature -15/+40 °C
  • Operating temperature -15/+50 °C
  • Compressed air supply 6-7 bar, oil-free and dry
Slide valve AS.11

Slide normally open

    • Stainless steel pipe connection
    • Valve housing made of aluminium
    • Slide plate made of PET
    • Bulk material temperature -5 / + 80 °C
    • Ambient temperature -5 / + 50 °C
    • Compressed air supply 6 bar, oil-free and dry
    • Power supply 24 V DC

    A pneumatic connection piece (6 and 8 mm) is included.

    Slide valve AS.11

    Slide normally closed

      • Stainless steel pipe connection
      • Valve housing made of aluminium
      • Slide plate made of PET
      • Bulk material temperature -5 / + 80 °C
      • Ambient temperature -5 / + 50 °C
      • Compressed air supply 6 bar, oil-free and dry
      • Power supply 24 V DC

      A pneumatic connection piece (6 and 8 mm) is included.

      Sensor for position detection
      • Switching output NO contact
      • Supply voltage 10-30 VDC, max. 150 mA    
      • Cable length 2 m
      AS.11.SENSOR